wm5t_70
Coliseum In-Wall Installation Speaker
The WM5T/70 features built in 70-volt taps at 5, 10 or 20 watts as well as optional 8-ohm (25 watt) operation mean the WM5T/70’s can be driven by virtually any amplification or paging system including the Coliseum CA1 or CA1T.
Looking for a way to hide speakers in a room? Don't have space to put a speaker? The Coliseum WM5T/70 in-wall, flush mount loudspeaker is your answer. This compact speaker is ideally suited for many applications: commercial installations, home theatre, or home stereo. Using the volume between wall studs as an enclosure, this bass reflex speaker has a 5" woofer and mylar dome tweeter that provide impressive bass, and clean, crisp high frequency response. Installation is a snap with the provided cutting/painting template, while press-fit grille hides all mounting holes to give the WM5T/70 a very clean and finished look. All mounting hardware is also provided. The baffle is made of white ABS plastic with a matching, white, perforated metal grille. It can be easily painted to match its surroundings.
Features
- High Performance Two-Way In-wall Speaker
- 5-inch Woofer / 1-inch Mylar Dome Tweeter
- Selectable 70-volt or 8-ohm Operation
- Power Taps at 5, 10 and 20 Watts
- 50 watts (8-ohm mode)
- Open Back Design
- Mounting Hardware Included
- Paintable Metal Grille and ABS Plastic Baffle
- Installation Hole Size - 267mm x 182.5mm
Specifications
| System Type | 2-way, Full Range, In-Wall Mount |
| Active or Passive | Passive |
| Program Power (Watts) | 50 |
| Nominal Impedance (Ohms) | 4 |
| Sensitivity (dB AT 1Watt/1m) | 92 |
| Frequency Response (Hz +/- 3dB) | 80 -18,000 |
| Driver Configuration | Tweeter, 5 inch |
| HF Driver(s) | Mylar Tweeter |
| HF Dispersion (°H x °V) | 90x90 |
| LF Driver(s) | 5 inch |
| Inputs | Solder Lug |
| Other Controls / Features | Optional LT-70V5W five watt, 70V matching transformer is available. |
| Included Hardware | Mounting Screws and Bracket |
| Enclosure Materials | Injection Molded, ABS Plastic |
| Grille | Perforated Steel |
| Covering / Finish | Low Reflective White |
| Other Details | Cutting/Painting Template and Putty Sealer Strip also included. |
| Dimensions (DWH xbackW inches) | 3.5 x 7.5 x 11 |
| Dimensions (DWH xbackW cm) | 9 x 19 x 28 |
| Weight (lbs/kg) | 3 / 1.4 |
Specifications subject to change without notice
The WM5T/70 features built in 70-volt taps at 5, 10 or 20 watts as well as optional 8-ohm (25 watt) operation mean the WM5T/70’s can be driven by virtually any amplification or paging system including the Coliseum CA1 or CA1T.
Looking for a way to hide speakers in a room? Don't have space to put a speaker? The Coliseum WM5T/70 in-wall, flush mount loudspeaker is your answer. This compact speaker is ideally suited for many applications: commercial installations, home theatre, or home stereo. Using the volume between wall studs as an enclosure, this bass reflex speaker has a 5" woofer and mylar dome tweeter that provide impressive bass, and clean, crisp high frequency response. Installation is a snap with the provided cutting/painting template, while press-fit grille hides all mounting holes to give the WM5T/70 a very clean and finished look. All mounting hardware is also provided. The baffle is made of white ABS plastic with a matching, white, perforated metal grille. It can be easily painted to match its surroundings.
Features
- High Performance Two-Way In-wall Speaker
- 5-inch Woofer / 1-inch Mylar Dome Tweeter
- Selectable 70-volt or 8-ohm Operation
- Power Taps at 5, 10 and 20 Watts
- 50 watts (8-ohm mode)
- Open Back Design
- Mounting Hardware Included
- Paintable Metal Grille and ABS Plastic Baffle
- Installation Hole Size - 267mm x 182.5mm
Specifications
| System Type | 2-way, Full Range, In-Wall Mount |
| Active or Passive | Passive |
| Program Power (Watts) | 50 |
| Nominal Impedance (Ohms) | 4 |
| Sensitivity (dB AT 1Watt/1m) | 92 |
| Frequency Response (Hz +/- 3dB) | 80 -18,000 |
| Driver Configuration | Tweeter, 5 inch |
| HF Driver(s) | Mylar Tweeter |
| HF Dispersion (°H x °V) | 90x90 |
| LF Driver(s) | 5 inch |
| Inputs | Solder Lug |
| Other Controls / Features | Optional LT-70V5W five watt, 70V matching transformer is available. |
| Included Hardware | Mounting Screws and Bracket |
| Enclosure Materials | Injection Molded, ABS Plastic |
| Grille | Perforated Steel |
| Covering / Finish | Low Reflective White |
| Other Details | Cutting/Painting Template and Putty Sealer Strip also included. |
| Dimensions (DWH xbackW inches) | 3.5 x 7.5 x 11 |
| Dimensions (DWH xbackW cm) | 9 x 19 x 28 |
| Weight (lbs/kg) | 3 / 1.4 |
Specifications subject to change without notice